MIMAKI JV3-160S Einstellungsanleitung PDF herunterladen (Seite 114)

– 5.24 –

3) Plot the adjusting pattern using the

key.

Clear the adjustment value using the key.

Press the

or key to enter a correction

value without performing plotting.

After the completion of plotting, enter a correction

value.

4) Enter the measured value of the dead space in

units of 0.1 mm, using the

or key.

Press the

ENTER

key to store the entered

value.

5) The indication given in the step of procedure

3) will be restored on the LCD.

Press the

key to exit from the “EDGE

ADJUST.”

To clear the adjustment value, press the

key.

To draw an adjusting pattern, press the

key.

# ADJUST EDGE

L = 15.0 R = 15.0

# ADJUST

CLEAR < > DRAW

# ADJUST EDGE

CLEAR < > DRAW

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 169 170

Keine Kommentare

MIMAKI JV3-160S Einstellungsanleitung Seite 114