MIMAKI UJF-3042HG Spezifikationen PDF herunterladen (Seite 68)

3-16

Increasing cumulative UV irradiation when the number of passes is low

When the number of passes is low (720x600: 8 passes or less, 720x900: 12 passes or less, 720x1200: 8 passes

or less), cumulative UV light quantity irradiated to the discharged ink is smaller, which may cause insufficient UV

curing for some media type.

Setting [UV Curing Level] reduces the number of nozzles to be used when the number of passes is low. Increas-

ing the scan count increases the cumulative UV light quantity. (UJF-3042HG: Supported from the firmware

ver.3.80, UJF-6042: Supported from the firmware ver.1.50)

Press the key in the local mode.

Select the [SET UP] by pressing the or key,

and press the key.

Select the [UV Curing Level] by pressing the or

key, and press the key.

Select curing level to be set by pressing the or

key, and press the key.

• Set value: 0(default), 1, 2, 3

Press the key several times to end the setting.

• This operation is available only when the number of passes is low (720x600: 8 passes or less, 720x900:

12 passes or less, 720x1200: 8 passes or less). In other drawing modes, the number of nozzles used

normally are used for drawing.

• Due to a reduced number of nozzles used for drawing, the drawing time becomes longer.

<LOCAL>

FUNCTION

FUNCT I ON

WOR K S E T < E N T >

ENTER

SET UP

UV Cur i ng Leve l <en t >

ENTER

SET UP

UV Cu r i n g L e v e l : 0

ENTER

END

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 155 156

Keine Kommentare

MIMAKI UJF-3042HG Spezifikationen Seite 68