MIMAKI JV33-130 Spezifikationen PDF herunterladen (Seite 31)

Operation Principle

2-19

Initial Filling

At device starting, when ink is not filled, initial filling is conducted. Operation sequence is as the

following.

* As an IC chip is not placed in a pre-fill up solution cartridge, it is recognized that IC chip read error means normal.

* If performing a 6 (8)-color fill when installing the device, the couplers need to be change before the fill.

No. Item Content

1 Selection of model A set value is selected among values shown below.

Set value: SOLVENT-INK spec, AQUEOUS-INK spec

Select only for initial filling at setup.

2 Selection of ink type

(Ink type)

When SOLVENT-INK spec. is chosen, select the following setting values.

Set value: ES3 Sol, SS21 Sol

When AQUEOUS-INK spec. is chosen, select the following setting values.

Set value: PIG, Sb51

3 Selection of number of

colors

(Ink set)

Except with Sb51, select the setting value below.

Set value: 4-Color (MMCCYYKK), 6-Color (MmCMcCKY),

6+W Color (MWCWYmKc) *Only when SS21 selected

With Sb51, select the setting value below.

Set value: 4-Color (MMBBYYKK), 6-Color (MmBMbBKY)

4 Preparing to fill the pre-

fill up solution

Discharging of the transportation liquid remaining in the ink paths.

5 Filling of the pre-fill up

solution

Insert a pre-fill up solution cartridge in all slot to be sucked (All 8 cartridges)

Skipped with the AQUEOUS-INK spec.

If there is an occurrence of warning* in a pre-fill up solution cartridge, suction is not

conducted.

Displayed when a waste ink tank warning occurs.

6 Discharging of the pre-

fill up solution

Discharging of the pre-fill up solution.

7 Filling of the ink Inserting ink cartridges into all slots and ink filling is conducted.

<4-color filling>

1. Filling to the coupler

Within the same supply system, open the valves in the order of even columns -> odd columns,

and fill the ink up to the coupler.

2. Fill up to the damper (head).

<6-color filling>

1. Open all of the valves and fill the ink up to the damper (head).

If a warning occurs in the ink cartridge, filling is not conducted.

Displayed when a waste ink tank warning occurs.

If a cartridge warning occurs during filling to the damper (head), filling is continued with

replacing cartridges. (4-color only)

Filling is stopped when ink supply fails in one supply system.

8 Filling of the

maintenance washing

solution

Filling of exclusive washing solution for pump tube cleaning.

Insertion of the washing solution cartridge into a slot is confirmed and filling is conducted.

If a warning occurs in the washing solution cartridge, filling is not conducted.

Displayed when a waste ink tank warning occurs.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 151 152

Kommentare zu diesen Handbüchern

Keine Kommentare

MIMAKI JV33-130 Spezifikationen Seite 31

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen MIMAKI JV33-130