MIMAKI UJF-706 Spezifikationen PDF herunterladen (Seite 145)

Check first when a trouble occurred

5-3

In Case of Trouble

Problems of drawing result

If the drawing result has a problem, follow the table below. If the problem does not improve after that, con-

tact a distributor in your district or our office.

Nozzle clogging

If nozzle clogging is not solved after the head cleaning of P.2-14, check the following 3 items.

Execute cleaning by hard with the operation of P.2-15.

Execute subtank maintenance with the operation of P.4-24.

Replace ink with the operation of P.4-4.

Problem Solution

Lines / blur (1) Execute the head cleaning. ( P.2-14)

(2)If there is slips of paper in the head path, remove them.

Large ink droplet on media (1) Execute the head cleaning. ( P.2-14)

(2)Remove the dust of the media.

(3)Clean dust on the platen.

(4)Clean the bottom of the carriage. ( P.4-10)

Media is raised during drawing and the

drawing stops.

(1)Set new media and start printing.

Ink cannot harden. (1) Check that the head gap is not too wide. P.3-16

(2)Check the UV lamp illumination intensity. P.4-40

(3)

Check the UV light intensity. P.3-19

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 183 184

Keine Kommentare

MIMAKI UJF-706 Spezifikationen Seite 145